Description
The MT650 waterproof contactless card reader is intended for use outdoors or in damp environments, and is supplied with an integral rubber sealing strip which provides IP65 rated protection. This reader is normally used with Read Only or Access Control firmware, but can be used with other firmware variants.
If ordered with Access Control firmware, it is supplied with sensor input terminals and a relay for operating a door lock, turnstile or gate..
Technical
| Interface | Serial RS232 |
| Card types | Mifare 1K and 4K Mifare Desfire * Mifare Plus * Type A * Innovision Jewel and Topaz **Depending on firmware |
| Electrical | Requires 12v dc at 160mA (max) Also operates on 9v dc if no relay specified. Access Control Firmware only Egress Switch input terminals Door Open detect input terminals Fire Alarm input terminals N/O, common and N/C relay terminals Relay rated to 48v, 1A dc |
| Firmware | Read Only Read/Write ITSO Read Access Control Bespoke |
Pricing
£220 per unit
*Prices exclude VAT & carriage
Downloads